POSSUM POINTAlabama | 2026

POSSUM POINT is reported in Lanett, Chambers, Alabama. WFIGS/NIFC reports 120 acres and 90% containment. The latest agency update is dated Oct 24, 2026, 5:55 PM ET. NASA satellite heat on the map is a separate observation and is not automatically attributed to this fire.

View fire map Official resources
Share & export
Export reports CSV
Share

At a glance

Facts from the latest available WFIGS/NIFC report.

Reported area120acres / 48.6 hectares
Reported containment90%Not an all-clear or percent extinguished
Discovery dateOct 23, 2026Reported discovery, not verified ignition time
Reported locationLanett, Chambers, AlabamaAgency location record
90%

90% reported contained. A containment percentage does not establish that the fire is out.

Agency record updated
Retrieved by WildfireSignal

POSSUM POINT map

The fire pin and blue ring mark this incident's reported point. They are not a fire boundary or evacuation zone.

Alabama overview →
Filters
Time Window
Heat Intensity
Very strong>330 K
Strong300-330 K
Satellite heat Loading...
Wildfire Overview
Current map view
Heat detections --
Very strong --
Last update --
Layers
Official fire Perimeter Strong heat Very strong
Reported incident locationSatellite heat, not attributed to this fireAgency perimeter when available via Layers

About POSSUM POINT

The agency recorded discovery on Oct 23, 2026, 5:30 AM ET. The cause remains listed as "Undetermined", so this record does not establish a specific cause.

The agency describes the location or incident as: “11 Miles NE from Lanett, AL”.

Reported fire behavior: Minimal.

Discovery
Oct 23, 2026
Reported cause
Undetermined

Source: facts and saved reports from WFIGS/NIFC agency records. Check the report date for the timing of these details. How we use this data.

What changed for POSSUM POINT

Saved WFIGS/NIFC observations show how the agency-reported area and containment have changed. WildfireSignal does not estimate values between reports.

From Oct 23 to Oct 26, agency-reported area decreased from 140 to 120 acres, while reported containment rose from 50% to 90%.

Last 24 hours
Reported areaNo reported change
ContainmentNo reported change

Compared with the latest saved report at or before 24 hours earlier.

Last 7 days
Reported areaInsufficient saved reports
ContainmentInsufficient saved reports

No saved reports cover this comparison period.

First saved by WildfireSignalOct 23, 2026, 10:20 PM ET
Latest meaningful saved changeOct 24, 2026, 6:03 PM ET

Since the previous saved report

Reported areaNo reported changeCompared with reports saved Oct 25, 6:25 PM ET and Oct 26, 12:29 AM ET
Reported containmentNo reported changeCompared with reports saved Oct 25, 6:25 PM ET and Oct 26, 12:29 AM ET

These figures compare agency reports saved at different times; they are not a measured spread rate. Acreage can change after mapping corrections, and unchanged values do not mean conditions on the ground are unchanged.

Seven-day report progression

One latest saved observation is shown for each day with history available.

Recent daily saved reports for POSSUM POINT
DateReported acresContainmentAgency updated
Oct 26, 2026 ET12090%
Oct 25, 2026 ET12090%
Oct 24, 2026 ET12090%
Oct 23, 2026 ET14050%
View all saved agency reports (10)

WildfireSignal begins saving agency reports when it first observes a fire. Up to 48 recent observations are kept for 35 days. A compact incident identity and latest sourced summary are retained for up to five years so stable citations can outlast the detailed snapshot window; earlier detailed reports are not reconstructed.

Observed report snapshots for POSSUM POINT
Saved by WildfireSignalAgency record updatedReported acresContainmentFeed presence
12090%In observed feed
12090%In observed feed
12090%In observed feed
12090%In observed feed
12090%In observed feed
12090%In observed feed
14050%In observed feed
14050%In observed feed
14050%In observed feed
14050%In observed feed

Fire details

Reported location
Lanett, Chambers, Alabama
Discovery
Reported cause
Undetermined
Primary fuel / fuel model
Timber (Grass and Understory)
Reported fire behavior
Minimal
Management organization
Type 3 IC
Incident complexity
Type 3 Incident
Incident identifier
2026-ALALS-261023-12
Situation report date
Reported coordinates
32.9408, -85.2558

Optional facts appear only when present in the feed. Agency abbreviations and fuel-model labels are shown as reported, without guessing missing details.

Questions about POSSUM POINT

Where is POSSUM POINT?

The official incident record places it in Lanett, Chambers, Alabama. The map pin is a reported location, not the full fire boundary.

How large is POSSUM POINT?

The latest available record reports 120 acres (approximately 48.6 hectares). This is reported incident size, not a measurement of current flames, and agencies can revise it.

How contained is POSSUM POINT?

The latest available record reports 90% containment. Containment describes control work intended to stop spread. It is not the percentage extinguished or an all-clear for nearby communities.

When was POSSUM POINT discovered?

The reported discovery date is Oct 23, 2026, 5:30 AM ET. Discovery time may differ from ignition time; elapsed time does not establish continuous burning.

Where should I check evacuation orders and road closures?

Use local emergency management, the sheriff or other law enforcement, and official fire-agency updates. WildfireSignal does not verify evacuation zones, open roads, or safe travel routes. The official-information section provides starting points; it does not establish that orders are present or absent.

Why can the map and the incident report differ?

Agency records, mapped perimeters and NASA satellite detections are updated on different schedules. Satellite heat near a fire is not automatically attributed to that incident. Older or unavailable data does not establish that an area is safe.

Source details & methodologyHow this page uses agency, satellite and map data

This page combines agency incident reporting with separate satellite and map layers. They can update at different times and answer different questions.

Agency report

WFIGS / NIFC

Use this for the reported fire name, acreage, containment, incident location and agency update time shown on this page.

Satellite observations

NASA FIRMS

Heat detections can show recent thermal activity, but they are not an official acreage or containment figure and are not automatically attributed to this incident.

Boundary context

Agency perimeter layer

When a perimeter is available in the map layers, it may have a different timestamp from the incident report. The fire pin itself is only a reported location.